If your Opus 1's burr handle comes out, there's no need to worry! It's designed to be reattached, and this article contains the steps to do so. Keep reading to learn how to reattach your burr's handle.
Instructions
Before starting, grab a pair of needle-nose pliers. They'll make the process much easier.
If you haven't already, remove the load bin by turning it counterclockwise. Then, locate one of the two holes that the handle sits in.
Then, insert one side of the handle into the first hole.
Ensure that the first side is secure, and then grab the other side with pliers.
Using the pliers for leverage, bend the other side of the handle in and move the end toward the second hole. If possible, insert the handle using the pliers.
If needed, you can finish placing the handle with your hands. However, this might scratch the basket the burr sits in.
Video Reference
If you'd like to see the entire process in action, check out the video below!
Need More Help?
Ask our specially-trained CX assistant by clicking on the chat icon in the bottom right corner of this page. It will help you solve the issue or get you connected with someone from our Customer Experience team.