Manual Atmos canisters are designed to hold a seal between 3 and 5 days, and you may notice a gradual decrease in vacuum pressure each day. However, if your Atmos isn't holding a seal for a minimum of 3 days, the steps below may just help it get back to working normally!
Table of Contents
Troubleshooting
Remove the Gasket & Filters
Begin by turning your Atmos lid over so the metal filter is facing upward. Then, remove the gasket surrounding the base of the lid.
Then, remove the metal and paper filters from the lid. Make sure they're kept clean and free from dust and debris while they're not being used.
Clean the Valve
Find the pill-shaped air valve and forcefully blow air into the opening to clear out anything that's stuck. In the example below, we use a small hand blower that is used with camera equipment and in other applications. If you have a can of compressed air, even better! Just make sure that it looks as clean as possible before moving forward.
Reassemble the Lid
Once the valve looks clean, reapply the paper and then the metal filters to the bottom of the lid.
Finally, reattach the gasket, ensuring that the thicker, non-curved end is up against the bottom of the lid. If this isn't done correctly, the Atmos lid will not fit properly on the canister.
Reseal the Atmos
Once the lid is reassembled properly, put it on the canister and twist it until the green indicator becomes visible. Then, give it a few more twists to ensure an extra-tight seal.
Need More Help?
Ask our specially-trained CX assistant by clicking on the chat icon in the bottom right corner of this page. It will help you solve the issue or get you connected with someone from our Customer Experience team.
Related to: